Please use this identifier to cite or link to this item: https://repository.unad.edu.co/handle/10596/34246
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorGranados acuña, gerardo-
dc.coverage.spatialcead_-_medellínspa
dc.creatorZuleta Pérez,Miguel Andrés-
dc.date.accessioned2020-05-27T23:22:23Z-
dc.date.available2020-05-27T23:22:23Z-
dc.date.created2020-05-20-
dc.identifier.urihttps://repository.unad.edu.co/handle/10596/34246-
dc.description.abstractRESUMEN Se realizó los 2 ejercicios donde fue demostrado el conocimiento adquirido en administración de redes, específicamente en CCNP de la empresa CISCO que se especializa en Redes de comunicaciones. Estos se desarrollaron el aplicativo Packet Tracert. En el primer escenario se configura 4 routers con enrutamiento dinámico BGP, que se establece con las IP configuradas en las interfaces físicas, cada router anuncia a su vecino las IP loopback que tiene configuradas. Entre el los router R3 y R4 se modificó el enrutamiento para establecer BGP con una de las interfaces Loopback, lo que requirió modificar una de las configuraciones a enrutamiento estático. En este punto no logramos terminar dado que Packet Tracer no reconoce 2 comandos necesarios para subir esta configuración. En el segundo escenario se configuro 3 SW, uno en modo servidor y dos más modo cliente, los tres están conectados entre sí, esto permite tener una alta conmutación. En el SW Servidor configura las Vlans y se replica en los SW cliente. Se asigna un direccionamiento diferente a cada Vlan por lo que solo entre las mismas vlan tienen conectividad. El circuito está diseñado que en caso de fallar algún Switch por la Electrónica o alguna desconexión física, halla una conmutación por otro SW. Palabras Clave: CISCO, CCNP, CONMUTACIÓN, ENRUTAMIENTO, REDES, ELECTRÓNICA.spa
dc.formatpdf
dc.titleDiplomado de profundización cisco - prueba de habilidades prácticas ccnp
dc.typeDiplomado de profundización para grado
dc.subject.keywordsPalabras Clave: CISCO, CCNP, CONMUTACIÓN, ENRUTAMIENTO, REDES, ELECTRÓNICA.spa
dc.description.abstractenglishABSTRACT The 2 exercises were carried out where the knowledge acquired in networking was demonstrated, specifically in CCNP of the CISCO company that specializes in Communication Networks. These were developed the Packet Tracert application. In the first scenario, 4 routers are configured with dynamic BGP routing, which is established with the IPs configured on the physical interfaces, each router announces its configured IP loopback to its neighbor. Between routers R3 and R4, routing was modified to establish BGP with one of the Loopback interfaces, which required modifying one of the configurations to static routing. At this point we were unable to finish since Packet Tracer does not recognize the 2 commands necessary to upload this configuration. In the second scenario, 3 SW were configured, one in server mode and two more in client mode, all three are connected to each other, this allows high switching. In the Server SW, configure the Vlans and replicate in the client SW. A different addressing is assigned to each Vlan so that only between the same vlan do they have connectivity. The circuit is designed so that in the event of a failure by the Electronics or a physical disconnection, it finds a switch for another SW. Keywords: CISCO, CCNP, ROUTING, SWICTHING, NETWORKING, ELECTRONICSspa
dc.subject.categoryIngeniería De Telecomunicacionesspa
Appears in Collections:Diplomado de Profundización CISCO CCNP

Files in This Item:
File Description SizeFormat 
mazuletape.pdf738.02 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.