dc.contributor.advisor | Torres Silva, Pedro | |
dc.coverage.spatial | ccav_-_neiva | spa |
dc.creator | Meléndez Ocampo, Alexis | |
dc.date.accessioned | 2017-10-25T15:46:38Z | |
dc.date.available | 2017-10-25T15:46:38Z | |
dc.date.created | 2017-10 | |
dc.identifier.uri | https://repository.unad.edu.co/handle/10596/13439 | |
dc.description.abstract | Se realiza la implementación del monitoreo y control posición de un motor dc del módulo M2CI, con el objetivo de aprender a manipular la variable del giro de un motor DC con ayuda del DAQ UBS 6008.
Para poder controlar el control de giro del motor de DC fue necesario investigar los dispositivos involucrados para tal fin; se realizó la descarga de programas para poder realizar el correcto funcionamiento y la calibración de los instrumentos. Se descargó el software Labview y NIMax los cuelas se complementar para poder hacer las pruebas respectivas de adquisición y procesamiento de datos, para posteriormente realizar el control del motor DC.
Por medio del programa de Laview y su interfaz gráfica nos ayudó a programar y procesar los datos adquiridos por el DAQ 6008 todas las variables ya sea de forma análoga o digital. | spa |
dc.format | pdf | spa |
dc.format.mimetype | application/pdf | spa |
dc.language.iso | spa | spa |
dc.publisher | Universidad Nacional Abierta y a Distancia UNAD | spa |
dc.title | Desarrollo e implementación de un modelo experimental de monitoreo y control posición de un motor DC que está instalado en el módulo de Monitoreo y Control de Instrumentación. | spa |
dc.type | Proyecto aplicado | spa |
dc.subject.keywords | Automatización | spa |
dc.subject.keywords | Monitoreo – Control de Instrumentación | spa |
dc.subject.keywords | Procesamiento de Datos | spa |
dc.subject.keywords | Señal Analógica Digital | spa |
dc.subject.keywords | Software - Labview | spa |
dc.description.abstractenglish | The implementation of the monitoring and control of a dc motor of the M2CI module is carried out, in order to learn how to manipulate the variable of the rotation of a DC motor with the help of the DAQ UBS 6008.
In order to control the rotation control of the DC motor, it was necessary to investigate the devices involved for this purpose; the software was downloaded to allow the correct operation and calibration of the instruments. The Labview and NIMax software were downloaded and the data were complemented to perform the respective data acquisition and processing tests, and then the DC motor control.
Through the program Laview and its graphical interface helped us to program and process the data acquired by the DAQ 6008 all the variables either analogously or digitally. | spa |
dc.subject.category | Ingeniería Electrónica | spa |
dc.rights.accesRights | info:eu-repo/semantics/openAccess | spa |
dc.rights.acceso | Abierto (Texto Completo) | spa |