Mostrar el registro sencillo del ítem

dc.contributor.advisorGutiérrez Bareño, Raul
dc.coverage.spatialcead_-_josé_celestino_mutis
dc.creatorAlbarracín Borda, Stefany
dc.date.accessioned2021-07-22T14:08:54Z
dc.date.available2021-07-22T14:08:54Z
dc.date.created2021-07-20
dc.identifier.urihttps://repository.unad.edu.co/handle/10596/41753
dc.description.abstractEl presente documento plantea el desarrollo de dos escenarios de redes, el primer escenario solicita realizar la respectiva configuración de los router, la creación de interfaces loopback y su respectiva asignación a los protocolos de enrutamiento OSPF y EIGRP, por último se realiza la distribución y se verifica que el sistema esté conectado y cada router reconozca las interfaces en su tabla de enrutamiento, esta verificación es realizada con ayuda de un programa de simulación,y en el segundo escenario se solicita realizar la configuración de troncales y etherchannel entre los switch del sistema, se establece el protocolo de comunicación PAgP y LACP, se crean los puertos lógicos (Etherchannel) aumentando el ancho de banda, configuración de vlan con sus respectivos nombres y por último se realiza la comprobación para verificar que las vlan son reconocidas por todos los switch y los puertos troncales funcionan correctamente. Palabras clave: CISCO, CCNP, Conmutación, Enrutamiento, Redes, Electrónica
dc.formatpdf
dc.titleDiplomado de profundización cisco CCNP solución de dos escenarios presentes en entornos corporativos bajo el uso de tecnología cisco 
dc.typeDiplomado de profundización para grado
dc.subject.keywordsCISCO, CCNP, Conmutación, Enrutamiento, Redes, Electrónica
dc.description.abstractenglishThis document proposes the development of two network scenarios, the first scenario requests the respective configuration of the routers, the creation of loopback interfaces and their respective assignment to the OSPF and EIGRP routing protocols, finally the distribution is carried out and the verifies that the system is connected and each router recognizes the interfaces in its routing table, this verification is carried out with the help of a simulation program, and in the second scenario it is requested to configure the trunk and etherchannel configuration between the system switches, The PAgP and LACP communication protocol is established, the logical ports (Etherchannel) are created, increasing the bandwidth, configuring the vlan with their respective names and finally the verification is carried out to verify that the vlan are recognized by all the switches and the trunk ports are working properly. Keywords: CISCO, CCNP, Routing, Swicthing, Networking, Electronics.


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem