| dc.contributor.advisor | Parra, Hector | |
| dc.coverage.spatial | cead_-_bucaramanga | |
| dc.creator | Ferreira Barrera, Eder Daniel | |
| dc.date.accessioned | 2022-06-30T18:01:53Z | |
| dc.date.available | 2022-06-30T18:01:53Z | |
| dc.date.created | 2022-06-22 | |
| dc.identifier.uri | https://repository.unad.edu.co/handle/10596/49960 | |
| dc.description.abstract | En el presente trabajo se desarrolla como opción de grado para la áreas de Telecomunicaciones y electrónica, aplicando todas las habilidades prácticas de CISCO CCNP ejecutadas bajo un escenario propuesto.
El montaje del escenario se realizó en el software GNS3 donde se utilizaron las imágenes IOS tanto para los switch y Router, se establecieron requisitos para realizar la configuración y poder realizar la simulación y así poder conseguir la conexión entre dispositivos.
Se realizaron las configuraciones de los protocolos de enrutamiento necesarios para poder alcanzar la conexión adecuada entre dispositivos, estos protocolos se configuraron en dispositivos de capa 2 y paralelamente se configuraron en dispositivos de capa 3, esto con el fin de crear las correctas redes LAN para la conmutación de los host de cada una de las redes.
Además de esto se crean las vlan 8 y 13 en los switch, para poder lograr una correcta conmutación entre los dispositivos, también se crearon los grupos VRF para las 2 zonas, se configuran todos los dispositivos con seguridad, y se encriptan las claves.
Palabras clave: CISCO, CCNP, Conmutación, Enrutamiento, Redes, Electrónica | |
| dc.format | pdf | |
| dc.title | DIPLOMADO DE PROFUNDIZACION CISCO PRUEBA DE HABILIDADES PRÁCTICAS CCNP | |
| dc.type | Diplomado de profundización para grado | |
| dc.subject.keywords | Cisco | |
| dc.subject.keywords | ccnp | |
| dc.subject.keywords | Switching | |
| dc.subject.keywords | Routing | |
| dc.subject.keywords | Networks | |
| dc.subject.keywords | Electronics | |
| dc.description.abstractenglish | In the present work, it is developed as a degree option for the areas of Telecommunications and electronics, applying all the practical skills of CISCO CCNP executed under a proposed scenario.
The assembly of the scenario was carried out in the GNS3 software where the IOS images were used for both the switch and the Router, requirements were established to carry out the configuration and to be able to carry out the simulation and thus be able to achieve the connection between devices.
The configurations of the necessary routing protocols were made to be able to achieve the adequate connection between devices, these protocols were configured in layer 2 devices and in parallel they were configured in layer 3 devices, this in order to create the correct LAN networks for the switching of the hosts of each of the networks.
In addition to this, vlans 8 and 13 are created in the switches, in order to achieve correct switching between the devices, the VRF groups for the 2 zones were also created, all the devices are configured with security, and the keys are encrypted.
Keywords: CISCO, CCNP, Switching, Routing, Networks, Electronics. | |
| dc.subject.category | Cisco | |
| dc.subject.category | Telecomunicaciones | |
| dc.subject.category | Routing | |