Mostrar el registro sencillo del ítem

dc.contributor.advisorFlor Salazar, Paulita
dc.coverage.spatialcead_-_Tunja
dc.creatorRodriguez Martinez, Viviana Carolina
dc.date.accessioned2020-12-01T16:34:25Z
dc.date.available2020-12-01T16:34:25Z
dc.date.created2020-11-30
dc.identifier.urihttps://repository.unad.edu.co/handle/10596/37712
dc.descriptionANEXO1 Enlace de descarga de archivos de simulación https://drive.google.com/file/d/1Yabd3kCKp-F8bTX5Fs2WXenKRlfESow/view?usp=sharing
dc.description.abstractSe presentan dos escenarios, donde se realiza la configuración del Router, el Switch y los hosts con el direccionamiento ipv4 e ipv6 y con ayuda del packet tracer; sabiendo que ésta es una herramienta la cual sirve para simular una red con múltiples representaciones visuales y pruebas de conectividad a través del comando ping antes de llevarlo a un funcionamiento real. Entre las configuraciones podemos encontrar el DHCP el cual permite desde el router realizar la configuración a los hosts, otra y no menos importante en la de seguridad ya que con las contraseñas se protege los dispositivos de cualquier persona ajena al sistema el cual nos arroja un mensaje indicando acceso restringido; para identificar los dispositivos se deben colocar un nombre los cuáles podamos identificar, además de esto se crean la Vlnas con sus respectivos nombres y configuración para que se le asigne un direccionamiento ipv4 e ipv6. Para la realización de cada topología se debe primero verificar a qué interfaz va conectada y una vez configurada hay que activarla, las otras que no se necesitan se desactivan para no generar tanto tráfico y evitar que entren en conflicto entre ellas; esto con los comandos shutdown y no shutdown, se creen troncales las cuales pasan el tráfico de red por la configuración predeterminada. Hay que tener en cuenta que algunos comandos no los toma el packet tracer, en un simulador, pero al aplicarlos en la vida real si. Palabras Clave: CISCO, CCNA, Conmutación, Enrutamiento, Redes, y tecnología de la comunicación.
dc.formatpdf
dc.titleSolución de dos Escenarios Presentes en Entornos Corporativos Bajo el Uso de Tecnología CISCO
dc.typeDiplomado de profundización para grado
dc.subject.keywordsCCNA
dc.subject.keywordsConmutación
dc.subject.keywordsEnrutamiento
dc.subject.keywordsTecnología de la comunicación
dc.description.abstractenglishTwo scenarios are presented, where the configuration of Router, Switch and hosts is done with ipv4 and ipv6 addressing and with the help of the packet tracer; knowing that this is a tool which serves to simulate a network with multiple visual representations and connectivity tests through the ping command before taking it to a real operation. Among the configurations we can find the DHCP which allows from the router to make the configuration to the hosts, another one and not less important the security one since with the passwords the devices of any person outside the system are protected which throws a message to us indicating restricted access; to identify the devices a name must be placed which we can identify, in addition to this the Vlnas with its respective names and configuration are created so that an ipv4 and ipv6 direction is agin. In order to carry out each topology, it is first necessary to verify to which interface it is connected and once it is configured, it must be activated, the others that are not needed are deactivated so as not to generate so much traffic and avoid conflict between them; this, with the shutdown and no shutdown commands, trunks are created which pass the network traffic through the predetermined configuration. It should be noted that some commands are not taken by the packet tracer, in a simulator, but when applied in real life they are, Keywords: CISCO, CCNA, Switching, Routing, Networks, and communication technology.
dc.subject.categoryIngeniería de sistemas


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem