dc.contributor.advisor | Flor Salazar, Paulita | |
dc.coverage.spatial | cead_-_Tunja | |
dc.creator | Rodriguez Martinez, Viviana Carolina | |
dc.date.accessioned | 2020-12-01T16:34:25Z | |
dc.date.available | 2020-12-01T16:34:25Z | |
dc.date.created | 2020-11-30 | |
dc.identifier.uri | https://repository.unad.edu.co/handle/10596/37712 | |
dc.description | ANEXO1 Enlace de descarga de archivos de simulación https://drive.google.com/file/d/1Yabd3kCKp-F8bTX5Fs2WXenKRlfESow/view?usp=sharing | |
dc.description.abstract | Se presentan dos escenarios, donde se realiza la configuración del Router, el Switch
y los hosts con el direccionamiento ipv4 e ipv6 y con ayuda del packet tracer;
sabiendo que ésta es una herramienta la cual sirve para simular una red con
múltiples representaciones visuales y pruebas de conectividad a través del
comando ping antes de llevarlo a un funcionamiento real.
Entre las configuraciones podemos encontrar el DHCP el cual permite desde el
router realizar la configuración a los hosts, otra y no menos importante en la de
seguridad ya que con las contraseñas se protege los dispositivos de cualquier
persona ajena al sistema el cual nos arroja un mensaje indicando acceso
restringido; para identificar los dispositivos se deben colocar un nombre los cuáles
podamos identificar, además de esto se crean la Vlnas con sus respectivos nombres
y configuración para que se le asigne un direccionamiento ipv4 e ipv6.
Para la realización de cada topología se debe primero verificar a qué interfaz va
conectada y una vez configurada hay que activarla, las otras que no se necesitan
se desactivan para no generar tanto tráfico y evitar que entren en conflicto entre
ellas; esto con los comandos shutdown y no shutdown, se creen troncales las cuales
pasan el tráfico de red por la configuración predeterminada.
Hay que tener en cuenta que algunos comandos no los toma el packet tracer, en un
simulador, pero al aplicarlos en la vida real si.
Palabras Clave: CISCO, CCNA, Conmutación, Enrutamiento, Redes, y tecnología
de la comunicación. | |
dc.format | pdf | |
dc.title | Solución de dos Escenarios Presentes en Entornos Corporativos Bajo el Uso de Tecnología CISCO | |
dc.type | Diplomado de profundización para grado | |
dc.subject.keywords | CCNA | |
dc.subject.keywords | Conmutación | |
dc.subject.keywords | Enrutamiento | |
dc.subject.keywords | Tecnología de la comunicación | |
dc.description.abstractenglish | Two scenarios are presented, where the configuration of Router, Switch and hosts
is done with ipv4 and ipv6 addressing and with the help of the packet tracer; knowing
that this is a tool which serves to simulate a network with multiple visual
representations and connectivity tests through the ping command before taking it to
a real operation.
Among the configurations we can find the DHCP which allows from the router to
make the configuration to the hosts, another one and not less important the security
one since with the passwords the devices of any person outside the system are
protected which throws a message to us indicating restricted access; to identify the
devices a name must be placed which we can identify, in addition to this the Vlnas
with its respective names and configuration are created so that an ipv4 and ipv6
direction is agin.
In order to carry out each topology, it is first necessary to verify to which interface it
is connected and once it is configured, it must be activated, the others that are not
needed are deactivated so as not to generate so much traffic and avoid conflict
between them; this, with the shutdown and no shutdown commands, trunks are
created which pass the network traffic through the predetermined configuration.
It should be noted that some commands are not taken by the packet tracer, in a
simulator, but when applied in real life they are,
Keywords: CISCO, CCNA, Switching, Routing, Networks, and communication
technology. | |
dc.subject.category | Ingeniería de sistemas | |